Barrel centralizer for CROSMAN BENJAMIN BULLDOG .357
Tax included
Shipping calculated at checkout
4 in stock
Fast and careful shipping within 48 working hours.
Barrel centralizer for CROSMAN BENJAMIN BULLDOG .357. Offers a real gain in precision by avoiding vibrations due to the floating barrel when firing.
Made from high quality polymers to ensure the best experience.
Installation of the centralizer(s):
-
For safety reasons, carefully empty the entire air reserve via the bleed screw located in front of the Kick Connect valve. Wait 15 minutes for the air to be completely evacuated.
-
Dismantle the barrel protection casing by removing the 2 screws at the front and one at the rear of the upper face, then push it forward to reveal the barrel.
-
Detach the flexible plastic butt plate from your rifle.
Allow approximately 15 minutes for installation.
-
Drive out the star at the end of the barrel (it is normal that it comes with difficulty).
-
Insert the barrel centralizer(s) along the housing.
-
Reassemble the rifle.
Congratulations, you have just installed your barrel centralizers.
Recommendation: Install a minimum of 3 barrel centralizers along the length of the barrel to correct its floating.
